+33 474 558 877

export@continental-industrie.com

Multistage centrifugal blower model 600

Construction materials

Bearing body: Cast Iron FGL 250
Head, sections: Cast Iron FGL 250
Cross Bar: 13/16” (20 mm) diameter cold-drawn A60 steel
Sealing gasket compound: RTV IS502 Silicone
Sealing (air): 2 graphite rings on each terminal
Sealing (gas): 4 carbon rings on each terminal with inert gas injection

Bearings: 6320 C3 ball bearing per AFBMA B10 standard
Shaft: Carbon Steel 42 Cr Mo 4 (available in stainless steel)
Turbines: Formed Aluminum 6061/6082T6
Motor pedestal: Stainless steel
Chassis installation: UPN plated carbon steel
Noise level: OSHA compliant (certified testing available)

Technical data

Number of stages: From 1 to 6 (casting)
Inlet connection: Flange 24″ (612 mm), PN 10 DN 600
Outlet connection: Flange 2.5” (65 mm), PN 10 DN 500
Operating Speed: 3550 direct drive (60 Hz)
Lubrication: Oil at constant level
Diametro turbina : 35″ (890 mm) a 36″ (915 mm)

Turbine tip speed: 562 f/s (172 m/s)
Critical Speed: 3725 rpm (6-stage)
Transmission: Direct or v-gear
Vibration Tolerance: 4.5 mils from peak to peak (4.5 mm/s)
Final Shaft: 3″ 3/4 (95 mm), Standard Final Drive

Dimensions

Blower 600.01 : 680 x 3200 x 3658 (mm) / 3900 Kg
Blower 600.02 : 936 x 3505 x 3962 (mm) / 4800 Kg
Blower 600.03 : 1192 x 4115 x 4572 (mm) / 5800 Kg

Blower 600.04 : 1448 x 4115 x 4572 (mm) / 6700 Kg
Blower 600.05 : 1704 x 4724 x 5182 (mm) / 7700 Kg
Blower 600.06 : 1960 x 4724 x 5182 (mm) / 8600 Kg