Multistage Centrifugal Blower Model 008 – Continental Industrie

+33 474 558 877

export@continental-industrie.com

Multistage centrifugal blower model 008

Construction materials

Bearing body: Cast Iron FGL 250
Head, sections: Cast Aluminum Al Si 7 Mg
Cross Bar: 1/2” (12.7 mm) diameter cold-drawn A60 steel
Sealing gasket compound: RTV IS502 Silicone
Sealing (air): 2 graphite rings on each terminal
Sealing (gas): 4 carbon rings on each terminal with inert gas injection

Bearings: 6308 C3 ball bearing per AFBMA B10 standard
Shaft: C35 Carbon Steel (available in stainless steel)
Turbines: Cast Aluminum Si 10 Mg
Engine pedestal: Construction steel
Chassis installation: Anti-vibration plate
Noise level: OSHA compliant (certified testing available)

Technical data

Number of stages: From 1 to 10 (casting)
Inlet connection: 4″ (100 mm) flange, DN 100 PN 10
Outlet connection: Flange 2.5” (65 mm), DN 65 PN 10
Operating Speed: 3600 direct drive (60 Hz), 6400 with v-belt
Lubrication: Lubricating grease
Turbine diameter: 14″ (355.6 mm)

Turbine tip speed: 217 f/s (66 m/s)
Critical Speed: 5257 rpm (10-stage)
Transmission: Direct or v-correct
Vibration Tolerance: 1.5 mils from peak to peak (4.5 mm/s)
Final Shaft: 0.87″ (22 mm), Standard Final Drive

Dimensions

Blower 08.01 : 132 x 711 x 762 (mm) / 90 Kg
Blower 08.02 : 184 x 863 x 914 (mm) / 105 Kg
Blower 08.03 : 236 x 863 x 914 (mm) / 115 Kg
Blower 08.04 : 288 x 1016 x 1067 (mm) / 130 Kg
Blower08.05 : 340 x 1016 x 1067 (mm) / 140 Kg

Blower 08.06 : 392 x 1168 x 1219 (mm) / 155 Kg
Blower 08.07 : 444 x 1168 x 1219 (mm) / 155 Kg
Blower 08.08 : 496 x 1321 x 1371 (mm) / 180 Kg
Blower 08.09 : 548 x 1321 x 1371 (mm) / 190 Kg
Blower 08.10 : 600 x 1321 x 1371 (mm) / 200 Kg